Lamborghini R-1056 (DT) vs Steyr 1108 (a)

9 material differences · fewer than 12

Tractor one

1977–1984

No measured PTO figure

Tractor two

1977–1979

No measured PTO figure

Which should you choose?

Read our verdict on the R-1056 (DT) and the 1108 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini R-1056 (DT) and Steyr 1108 (a), field by field
Field	R-1056 (DT)	1108 (a)	Gap
Engine
Engine power, claimed claimed	103.5 hp	103.7 hp	—
Engine declared	SAME DA 986-3 or 916-6 W	Steyr WD-610.44	differs
Displacement declared	—	5.98 L	—
Maximum torque declared	251 lb·ft · 340 N·m	268 lb·ft · 363 N·m	+7% 1108 (a)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 1108 (a)
Clutch declared	—	Dry Fichtel & Sachs single-disc clutch	—
Hydraulics & hitch
Pump flow declared	12.7 gpm · 48.0 L/min	9.4 gpm · 35.5 L/min	+35% R-1056 (DT)
Three-point lift at ends declared	—	8,378 lb · 3,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,664 lb · 3,930 kg	8,477 lb · 3,845 kg	—
Wheelbase declared	107.3 in · 2,725 mm	99.8 in · 2,534 mm	+8% R-1056 (DT)
Length declared	178.0 in · 4,520 mm	165.0 in · 4,190 mm	+8% R-1056 (DT)
Width declared	88.6 in · 2,250 mm	82.5 in · 2,096 mm	+7% R-1056 (DT)
Height declared	114.2 in · 2,900 mm	85.0 in · 2,160 mm	+34% R-1056 (DT)
Ground clearance declared	21.3 in · 540 mm	19.5 in · 495 mm	+9% R-1056 (DT)
Turning radius, braked declared	—	13.1 ft · 4.00 m	—
Fuel tank declared	126.8 qt · 120.0 L	124.7 qt · 118.0 L	—

Source

Source