10 material differences · fewer than 12
Tractor oneLamborghini R-1056 (DT)1977–1984No measured PTO figureTractor twoLandini R-9500 (DT) "TL 19 N/B"1973–1983No measured PTO figure
Which should you choose?
Read our verdict on the R-1056 (DT) and the R-9500 (DT) "TL 19 N/B" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R-1056 (DT) | R-9500 (DT) "TL 19 N/B" | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.5 hp | 103.5 hp | — |
| Engine declared | SAME DA 986-3 or 916-6 W | Perkins A 6.354 | differs |
| Displacement declared | — | 5.80 L | — |
| Maximum torque declared | 251 lb·ft · 340 N·m | 182 lb·ft · 247 N·m | +38% R-1056 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% R-9500 (DT) "TL 19 N/B" |
| Clutch declared | — | Dry VALEO double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.7 gpm · 48.0 L/min | 9.2 gpm · 35.0 L/min | +37% R-1056 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,664 lb · 3,930 kg | 7,738 lb · 3,510 kg | +12% R-1056 (DT) |
| Wheelbase declared | 107.3 in · 2,725 mm | 95.3 in · 2,420 mm | +13% R-1056 (DT) |
| Length declared | 178.0 in · 4,520 mm | 160.6 in · 4,080 mm | +11% R-1056 (DT) |
| Width declared | 88.6–104.3 in · 2,250–2,650 mm | 81.5–93.3 in · 2,070–2,370 mm | differs |
| Ground clearance declared | 21.3 in · 540 mm | 19.3 in · 490 mm | +10% R-1056 (DT) |
| Turning radius, braked declared | — | 13.3 ft · 4.06 m | — |
| Fuel tank declared | 126.8 qt · 120.0 L | 97.2 qt · 92.0 L | +30% R-1056 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-1056 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 1056 DT”
Landini R-9500 (DT) "TL 19 N/B" sources
- Source: Traktorenlexikon, “Landini 9500”
- Source: Traktorenlexikon, “Massey Ferguson MF 699”