7 material differences · fewer than 12
Tractor oneKramer KL 3501966–1968No measured PTO figureTractor twoSchlüter Super 350 / 350 V1967–1972No measured PTO figure
Which should you choose?
Read our verdict on the KL 350 and the Super 350 / 350 V → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | KL 350 | Super 350 / 350 V | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 34.3 hp | — |
| Engine declared | KHD F3L 812/S | Schlüter SD 100 W3 | differs |
| Displacement declared | 2.55 L | 2.94 L | +15% Super 350 / 350 V |
| Maximum torque declared | — | 108 lb·ft · 147 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 12.4 mph · 20 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.1 gpm · 27.0 L/min | — | — |
| Pressure declared | 2,176 psi · 150 bar | — | — |
| Rear PTO speeds declared | 1245 | 615/1230 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,101 lb · 1,860 kg | 4,729–4,949 lb · 2,145–2,245 kg | differs |
| Maximum permissible mass declared | 5,622 lb · 2,550 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 78.7 in · 2,000 mm | — |
| Length declared | 131.1 in · 3,330 mm | 137.4 in · 3,490 mm | — |
| Width declared | 61.0 in · 1,550 mm | 67.3 in · 1,710 mm | +10% Super 350 / 350 V |
| Ground clearance declared | 13.4 in · 340 mm | — | — |
| Turning radius, braked declared | — | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 37.0 qt · 35 L | 60.2 qt · 57 L | +63% Super 350 / 350 V |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Kramer KL 350 sources
- Source: Traktorenlexikon, “Kramer KL 350”
Schlüter Super 350 / 350 V sources
- Source: Traktorenlexikon, “Schlüter Super 350 / 350 V”
- Source: Traktorenlexikon, “Schlüter S 350 / 350 V”