9 material differences · fewer than 12

Tractor oneKramer K 281947–1950No measured PTO figureTractor twoMAN 2N11961–1962No measured PTO figure

Which should you choose?

Read our verdict on the K 28 and the 2N1 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

Kramer K 28 and MAN 2N1, field by field
Field	K 28	2N1	Gap
Engine
Engine power, claimed claimed	27.5 hp	27.5 hp	—
Engine declared	Güldner 2F	MAN D 9422 M 2	differs
Displacement declared	2.60 L	1.66 L	+56% K 28
Transmission
Top speed declared	12.2 mph · 19.7 km/h	11.8 mph · 19 km/h	—
Clutch declared	single-disc dry clutch by Fichtel & Sachs	Single plate dry clutch	differs
Hydraulics & hitch
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,409 lb · 2,000 kg	3,527 lb · 1,600 kg	+25% K 28
Wheelbase declared	71.7 in · 1,820 mm	73.5 in · 1,868 mm	—
Length declared	112.2 in · 2,850 mm	122.4 in · 3,110 mm	+9% 2N1
Width declared	61.0 in · 1,550 mm	62.2 in · 1,580 mm	—
Ground clearance declared	11.8 in · 300 mm	15.7 in · 400 mm	+33% 2N1
Turning radius, braked declared	6.6 ft · 2.00 m	9.5 ft · 2.90 m	+45% 2N1
Fuel tank declared	29.6 qt · 28 L	44.4 qt · 42 L	+50% 2N1

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Kramer K 28 sources

Source

Source: Traktorenlexikon, “Kramer K 28”
Source: Traktorenlexikon, “Güldner AF 30”

MAN 2N1 sources