9 material differences · fewer than 12

Tractor oneKramer 4141970–1972No measured PTO figureTractor twoURSUS 40111965–1970No measured PTO figure

Which should you choose?

Read our verdict on the 414 and the 4011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 2 fields identical or within 5%, which is not counted as material

Kramer 414 and URSUS 4011, field by field
Field	414	4011	Gap
Engine
Engine power, claimed claimed	42 hp	41.4 hp	—
Engine declared	Deutz F3L 912	URSUS U-4001	differs
Displacement declared	2.83 L	3.12 L	+10% 4011
Maximum torque declared	106 lb·ft · 143 N·m	133 lb·ft · 180 N·m	+26% 4011
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 414
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.0 L/min	5.3 gpm · 20.0 L/min	+60% 414
Pressure declared	2,134 psi · 147 bar	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,696–5,247 lb · 2,130–2,380 kg	4,630 lb · 2,100 kg	differs
Wheelbase declared	78.7 in · 2,000 mm	83.7 in · 2,125 mm	+6% 4011
Length declared	136.6 in · 3,470 mm	128.0 in · 3,250 mm	+7% 414
Width declared	64.8–67.3 in · 1,645–1,710 mm	70.5 in · 1,790 mm	differs
Ground clearance declared	—	17.2 in · 436 mm	—
Turning radius, braked declared	—	10.7 ft · 3.25 m	—
Fuel tank declared	—	74.0 qt · 70.0 L	—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Kramer 414 sources

Source

Source: Traktorenlexikon, “Kramer 414”

URSUS 4011 sources