8 material differences · fewer than 12

Tractor oneKramer 4141970–1972No measured PTO figureTractor twoSAME Atlanta-V (DT)1965–1968No measured PTO figure

Which should you choose?

Read our verdict on the 414 and the Atlanta-V (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 2 fields identical or within 5%, which is not counted as material

Kramer 414 and SAME Atlanta-V (DT), field by field
Field414Atlanta-V (DT)Gap
Engine
Engine power, claimed claimed42 hp41.4 hp—
Engine declaredDeutz F3L 912SAME 954/Vdiffers
Displacement declared2.83 L3.40 L+20% Atlanta-V (DT)
Maximum torque declared106 lb·ft · 143 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% 414
Hydraulics & hitch
Pump flow declared8.5 gpm · 32.0 L/min3.2 gpm · 12.0 L/min+167% 414
Pressure declared2,134 psi · 147 bar——
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared4,696–5,247 lb · 2,130–2,380 kg3,483 lb · 1,580 kgdiffers
Wheelbase declared78.7 in · 2,000 mm72.0 in · 1,830 mm+9% 414
Length declared136.6 in · 3,470 mm109.4 in · 2,780 mm+25% 414
Width declared64.8–67.3 in · 1,645–1,710 mm58.7 in · 1,490 mmdiffers
Ground clearance declared—16.9 in · 430 mm—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Kramer 414 sources

Source
  • Source: Traktorenlexikon, “Kramer 414”

SAME Atlanta-V (DT) sources

Source
  • Source: Traktorenlexikon, “SAME Atlanta V (DT)”
  • Source: Traktorenlexikon, “SAME Atlanta 45 (DT)”