4 material differences · fewer than 12

Tractor oneKramer 4141970–1972No measured PTO figureTractor twoRenault R-561967–1973No measured PTO figure

Which should you choose?

Read our verdict on the 414 and the R-56 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

4 material differences · 3 fields identical or within 5%, which is not counted as material

Kramer 414 and Renault R-56, field by field
Field414R-56Gap
Engine
Engine power, claimed claimed42 hp41.4 hp—
Engine declaredDeutz F3L 912——
Displacement declared2.83 L——
Maximum torque declared106 lb·ft · 143 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% 414
Clutch declared—Two-stage pedal operated dry Ferodo double clutch—
Hydraulics & hitch
Pump flow declared8.5 gpm · 32.0 L/min——
Pressure declared2,134 psi · 147 bar——
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared4,696–5,247 lb · 2,130–2,380 kg4,189 lb · 1,900 kgdiffers
Wheelbase declared78.7 in · 2,000 mm76.0 in · 1,930 mm—
Length declared136.6 in · 3,470 mm128.0 in · 3,250 mm+7% 414
Width declared64.8–67.3 in · 1,645–1,710 mm59.1–82.7 in · 1,500–2,100 mmdiffers
Ground clearance declared—16.9 in · 430 mm—
Turning radius, braked declared—10.8 ft · 3.29 m—
Fuel tank declared—58.1 qt · 55.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Kramer 414 sources

Source
  • Source: Traktorenlexikon, “Kramer 414”

Renault R-56 sources

Source
  • Source: Traktorenlexikon, “Renault 56 R7251”