11 material differences · fewer than 12
Tractor oneKramer 350 Export1963–1968No measured PTO figureTractor twoPorsche-Diesel 2081957No measured PTO figure
Which should you choose?
Read our verdict on the 350 Export and the 208 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 350 Export | 208 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 31.9 hp | 24.7 hp | +29% 350 Export |
| Engine declared | Standard Motor Company (Coventry/England) OE 138 | Porsche-Diesel F 208 | differs |
| Displacement declared | 2.26 L | 1.64 L | +37% 350 Export |
| Maximum torque declared | 88 lb·ft · 120 N·m | 66 lb·ft · 89 N·m | +35% 350 Export |
| Transmission | |||
| Top speed declared | 13.7 mph · 22 km/h | 12.4 mph · 20.0 km/h | +10% 350 Export |
| Clutch declared | Fichtel & Sachs double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 4.0 gpm · 15.0 L/min | +33% 350 Export |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 585 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,924 lb · 1,780 kg | 3,318 lb · 1,505 kg | +18% 350 Export |
| Maximum permissible mass declared | 5,512 lb · 2,500 kg | — | — |
| Wheelbase declared | 77.2 in · 1,960 mm | 65.7 in · 1,670 mm | +17% 350 Export |
| Length declared | 124.8 in · 3,170 mm | 111.0 in · 2,820 mm | +12% 350 Export |
| Width declared | 62.6 in · 1,590 mm | 61.7 in · 1,568 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 13.1 in · 334 mm | +20% 350 Export |
| Turning radius, braked declared | — | 8.9 ft · 2.70 m | — |
| Fuel tank declared | 37.0 qt · 35 L | 48.6 qt · 46 L | +31% 208 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Kramer 350 Export sources
- Source: Traktorenlexikon, “Kramer 350 Export”
Porsche-Diesel 208 sources
- Source: Traktorenlexikon, “Porsche-Diesel Standard 208”