John Deere-LANZ 310 vs WHITE 2-35
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 310 and the 2-35 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 310 | 2-35 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 31.5 hp | 30.6 hp | — |
| Engine declared | John Deere 152 D 25 L | ISUZU 3 AB-1 | differs |
| Displacement declared | 2.49 L | 1.78 L | +40% 310 |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Foot-operated two-stage dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 4.1 gpm · 15.6 L/min | 6.6 gpm · 25.0 L/min | +60% 2-35 |
| Pressure declared | 2,190 psi · 151 bar | — | — |
| Three-point lift at ends declared | 2,646 lb · 1,200 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,361 lb · 1,978 kg | 2,690 lb · 1,220 kg | +62% 310 |
| Maximum permissible mass declared | 5,864 lb · 2,660 kg | — | — |
| Wheelbase declared | 81.6 in · 2,072 mm | 69.0 in · 1,753 mm | +18% 310 |
| Length declared | 133.9 in · 3,400 mm | 122.0 in · 3,099 mm | +10% 310 |
| Width declared | 62.2 in · 1,580 mm | 61.0 in · 1,549 mm | — |
| Height declared | 61.8 in · 1,570 mm | 80.0 in · 2,032 mm | +29% 2-35 |
| Ground clearance declared | 15.7 in · 400 mm | 15.0 in · 381 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 9.0 ft · 2.75 m | +20% 310 |
| Fuel tank declared | 74.0 qt · 70 L | 31.7 qt · 30.0 L | +133% 310 |
John Deere-LANZ 310 sources
Source
- Source: Traktorenlexikon, “John Deere 310”
WHITE 2-35 sources
Source
- Source: Traktorenlexikon, “White 2-35”