John Deere-LANZ 100 or Warchalowski WT 20?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT 20 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Warchalowski WT 20 suits road haulage better on this data: 25% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere-LANZ 100 and Warchalowski WT 20, with the call on each
Question100WT 20Call
Which puts more power through the PTO shaft?13.2 kW (17.7 hp)Traktorenlexikon, “John Deere-Lanz 100”13.2 kW (17.7 hp)Traktorenlexikon, “Warchalowski WT 20”Not comparableNot comparable on power at the PTO shaft: the 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT 20 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 100 and the WT 20.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 100 and the WT 20.
Which pumps more oil for implements?7.0 L/min (1.8 gpm)Traktorenlexikon, “John Deere-Lanz 100”No figureNo call on hydraulic flow: no figure on record for the WT 20.
Which lifts more on the three-point hitch?1,280 kg (2,822 lb)Traktorenlexikon, “Warchalowski WT 20”No figureNo call on three-point lift: no figure on record for the 100.
Which is heavier, for traction?1,230 kg (2,712 lb)Traktorenlexikon, “John Deere-Lanz 100”885 kg (1,951 lb)Traktorenlexikon, “Warchalowski WT 20”Ahead (a fact, not an advantage)The John Deere-LANZ 100 is 39% heavier (345 kg / 761 lb) than the Warchalowski WT 20 (both unladen weight, as stated by the source).
Which may carry more ballast and load?2,000 kg (4,409 lb)Traktorenlexikon, “John Deere-Lanz 100”No figureNo call on maximum permissible mass: no figure on record for the WT 20.
Which has the wider choice of gears?6Traktorenlexikon, “John Deere-Lanz 100”5 to 6Traktorenlexikon, “Warchalowski WT 20”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 100 and the WT 20.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “John Deere-Lanz 100”25 km/h (15.5 mph)Traktorenlexikon, “Warchalowski WT 20”AheadThe Warchalowski WT 20 has 25% more top speed (5.0 km/h / 3.1 mph) than the John Deere-LANZ 100 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “John Deere-Lanz 100”540 rpmTraktorenlexikon, “Warchalowski WT 20”AheadThe John Deere-LANZ 100 offers 1000 rpm at the PTO, which the Warchalowski WT 20 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Warchalowski WT 20”No figureNo call on PTO independence: not stated for the 100.
Which drives on both axles?2WDTraktorenlexikon, “John Deere-Lanz 100”2WDTraktorenlexikon, “Warchalowski WT 20”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1962–19661958–1968EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere-LANZ 100 is 39% heavier (345 kg / 761 lb) than the Warchalowski WT 20 (both unladen weight, as stated by the source).
  • The Warchalowski WT 20 has 25% more top speed (5.0 km/h / 3.1 mph) than the John Deere-LANZ 100 (both top speed forward, as stated by the source).
  • The John Deere-LANZ 100 offers 1000 rpm at the PTO, which the Warchalowski WT 20 does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT 20 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources