John Deere 930 vs UZINA TRACTORUL R-450 (DT)

13 material differences

Tractor one

1974–1977

No measured PTO figure

Tractor two

1974–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 930 and the R-450 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 930 and UZINA TRACTORUL R-450 (DT), field by field
Field	930	R-450 (DT)	Gap
Engine
Engine power, claimed claimed	40.5 hp	45.3 hp	+12% R-450 (DT)
Engine declared	John Deere 3.164 DL 15	UTB D-115	differs
Displacement declared	2.70 L	2.34 L	+15% 930
Maximum torque declared	107 lb·ft · 145 N·m	105 lb·ft · 143 N·m	—
Transmission
Top speed declared	16.8–18.6 mph · 27–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal operated, two-stage dry Fichtel & Sachs double clutch	dry UTB double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	6.7 gpm · 25.4 L/min	5.8 gpm · 21.8 L/min	+17% 930
Pressure declared	3,481–4,496 psi · 240–310 bar	2,973 psi · 205 bar	differs
Three-point lift at ends declared	3,490 lb · 1,583 kg	2,646 lb · 1,200 kg	+32% 930
Rear PTO speeds declared	—	540 rpm	—
Weight & dimensions
Unladen weight declared	4,817 lb · 2,185 kg	3,968 lb · 1,800 kg	+21% 930
Maximum permissible mass declared	7,055 lb · 3,200 kg	—	—
Wheelbase declared	74.4 in · 1,890 mm	72.6 in · 1,845 mm	—
Length declared	136.2 in · 3,460 mm	123.6 in · 3,140 mm	+10% 930
Width declared	66.5 in · 1,690 mm	65.6 in · 1,666 mm	—
Height declared	89.8 in · 2,280 mm	57.3 in · 1,455 mm	+57% 930
Ground clearance declared	12.8 in · 325 mm	18.3 in · 465 mm	+43% R-450 (DT)
Turning radius, braked declared	9.6 ft · 2.92 m	10.6 ft · 3.22 m	+10% R-450 (DT)
Fuel tank declared	66.0 qt · 62.5 L	57.1 qt · 54.0 L	+16% 930

Source

Source