John Deere 920 vs John Deere 60
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 920 and the 60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 920 | 60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 36.5 hp | 36.9 hp | — |
| Engine declared | John Deere M 4 FL 9 or 3.152 DL-02 | — | — |
| Displacement declared | 2.49 L | — | — |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 11.0 mph · 17.7 km/h | differs |
| Clutch declared | Pedal operated dry Fichtel & Sachs single disc clutch | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.9 gpm · 26 L/min | 8.9 gpm · 33.7 L/min | +30% 60 |
| Three-point lift at ends declared | 2,745 lb · 1,245 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 536 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,740 lb · 2,150 kg | 5,908 lb · 2,680 kg | +25% 60 |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | — | — |
| Wheelbase declared | 74.4 in · 1,890 mm | 90.0 in · 2,286 mm | +21% 60 |
| Length declared | 134.8 in · 3,425 mm | 139.0 in · 3,531 mm | — |
| Width declared | 59.1 in · 1,500 mm | 86.6 in · 2,200 mm | +47% 60 |
| Height declared | 59.6 in · 1,515 mm | 65.6 in · 1,665 mm | +10% 60 |
| Ground clearance declared | 15.7 in · 400 mm | — | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | — | — |
| Fuel tank declared | 66.0 qt · 62.5 L | — | — |
John Deere 920 sources
Source
- Source: Traktorenlexikon, “John Deere 920”
John Deere 60 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 60”