John Deere 8430 or New Holland T 8030?
Which should you choose?
On performance, every comparable figure that differs favours the John Deere 8430: three-point lift. On features, the New Holland T 8030 is ahead on PTO speeds.
- The New Holland T 8030 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
- The John Deere 8430 suits loader and hydraulic implement work better on this data: 29% (2,636 kg / 5,811 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8430 | T 8030 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 203.9 kW (273.4 hp)Traktorenlexikon, “John Deere 8430” | 200.4 kW (268.7 hp)Traktorenlexikon, “New Holland T8030” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8430 and the T 8030. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8430 and the T 8030. |
| Which pumps more oil for implements? | — | 166.6 L/min (44.0 gpm)Traktorenlexikon, “New Holland T8030” | No figureNo call on hydraulic flow: no figure on record for the 8430. |
| Which lifts more on the three-point hitch? | 11,762 kg (25,931 lb)Traktorenlexikon, “John Deere 8430” | 9,126 kg (20,119 lb)Traktorenlexikon, “New Holland T8030” | AheadThe John Deere 8430 has 29% more lift (2,636 kg / 5,811 lb) than the New Holland T 8030 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 11,260 kg (24,824 lb)Traktorenlexikon, “John Deere 8430” | 9,848 kg (21,711 lb)Traktorenlexikon, “New Holland T8030” | Ahead (a fact, not an advantage)The John Deere 8430 is 14% heavier (1,412 kg / 3,113 lb) than the New Holland T 8030 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 14,000 kg (30,865 lb)Traktorenlexikon, “John Deere 8430” | 14,000 kg (30,865 lb)Traktorenlexikon, “New Holland T8030” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “John Deere 8430” | 19 to 23 forwardTraktorenlexikon, “New Holland T8030” | DifferTransmissions differ in kind: the John Deere 8430 is stepless (CVT) and the New Holland T 8030 has 19 to 23 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 8430 and the T 8030. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “John Deere 8430” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T8030” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “John Deere 8430” | 540/1000 rpmTraktorenlexikon, “New Holland T8030” | AheadThe New Holland T 8030 offers 540 rpm at the PTO, which the John Deere 8430 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland T8030” | No figureNo call on PTO independence: not stated for the 8430. |
| Which drives on both axles? | 4WDTraktorenlexikon, “John Deere 8430” | 4WDTraktorenlexikon, “New Holland T8030” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2006–2009 | 2006–2011 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The John Deere 8430 has 29% more lift (2,636 kg / 5,811 lb) than the New Holland T 8030 (both lift at the hitch ends, as stated by the source).
- The John Deere 8430 is 14% heavier (1,412 kg / 3,113 lb) than the New Holland T 8030 (both unladen weight, as stated by the source).
- The New Holland T 8030 offers 540 rpm at the PTO, which the John Deere 8430 does not (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the John Deere 8430 is stepless (CVT) and the New Holland T 8030 has 19 to 23 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources