11 material differences · fewer than 12
Tractor oneJohn Deere 8410 T2000–2002No measured PTO figureTractor twoNew Holland T 80302006–2011No measured PTO figure
Which should you choose?
Read our verdict on the 8410 T and the T 8030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 8410 T | T 8030 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 266.5 hp | 269.3 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-18 | CUMMINS 6 TAA-8304 (TIER-III) | differs |
| Displacement declared | 8.13 L | 8.27 L | — |
| Maximum torque declared | 844 lb·ft · 1,144 N·m | 861 lb·ft · 1,167 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Pedal operated hydraulic wet John Deere multi-plate clutch | Electro-hydraulically operated wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.4 gpm · 118.9 L/min | 44.0 gpm · 166.6 L/min | +40% T 8030 |
| Pressure declared | 2,944 psi · 203 bar | 3,336 psi · 230 bar | +13% T 8030 |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 26,378 lb · 11,965 kg | 21,711 lb · 9,848 kg | +21% 8410 T |
| Maximum permissible mass declared | 31,500 lb · 14,288 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 121.2 in · 3,078 mm | +36% T 8030 |
| Length declared | 216.0 in · 5,487 mm | 229.5 in · 5,829 mm | +6% T 8030 |
| Width declared | 134.0–150.0 in · 3,404–3,810 mm | 98.0 in · 2,490 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 14.6 in · 372 mm | — |
| Fuel tank declared | 519.9 qt · 492.0 L | 720.7 qt · 682.0 L | +39% T 8030 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 8410 T sources
- Source: Traktorenlexikon, “John Deere 8410T”
- Source: OECD test report 1937, 2000
New Holland T 8030 sources
- Source: Traktorenlexikon, “New Holland T8030”
- Source: Traktorenlexikon, “New Holland T8040”