9 material differences · fewer than 12
Tractor oneJohn Deere 84101999–2002No measured PTO figureTractor twoNew Holland T 80302006–2011No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1999–2002; 2006–2011). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 8410 | T 8030 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 266.5 hp | 269.3 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-17 | CUMMINS 6 TAA-8304 (TIER-III) | differs |
| Displacement declared | 8.13 L | 8.27 L | — |
| Maximum torque declared | 829 lb·ft · 1,124 N·m | 861 lb·ft · 1,167 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Pedal operated hydraulic wet John Deere multi-plate clutch | Electro-hydraulically operated wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.8 gpm · 120.4 L/min | 44.0 gpm · 166.6 L/min | +38% T 8030 |
| Pressure declared | 3,379 psi · 233 bar | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 20,439 lb · 9,271 kg | 21,711 lb · 9,848 kg | +6% T 8030 |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 116.1 in · 2,950 mm | 121.2 in · 3,078 mm | — |
| Length declared | 216.0 in · 5,487 mm | 229.5 in · 5,829 mm | +6% T 8030 |
| Width declared | 118.6–129.3 in · 3,012–3,283 mm | 98.0 in · 2,490 mm | differs |
| Ground clearance declared | 15.9 in · 405 mm | 14.6 in · 372 mm | +9% 8410 |
| Fuel tank declared | 540.0 qt · 511.0 L | 720.7 qt · 682.0 L | +33% T 8030 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 8410 sources
- Source: Traktorenlexikon, “John Deere 8410”
- Source: OECD test report 1936, 2000
New Holland T 8030 sources
- Source: Traktorenlexikon, “New Holland T8030”
- Source: Traktorenlexikon, “New Holland T8040”