John Deere 8410 vs Massey Ferguson MF 8180 A

9 material differences · fewer than 12

Tractor one

1999–2002

No measured PTO figure

Tractor two

1998–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 8410 and the MF 8180 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

John Deere 8410 and Massey Ferguson MF 8180 A, field by field
Field	8410	MF 8180 A	Gap
Engine
Engine power, claimed claimed	266.5 hp	256.7 hp	—
Engine declared	John Deere-PowerTech 6.081 HRW-17	VALMET 645 TCC	differs
Displacement declared	8.13 L	8.42 L	—
Maximum torque declared	829 lb·ft · 1,124 N·m	801 lb·ft · 1,086 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal operated hydraulic wet John Deere multi-plate clutch	pedal-operated hydraulic multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	31.8 gpm · 120.4 L/min	—	—
Pressure declared	3,379 psi · 233 bar	3,205 psi · 221 bar	+5% 8410
Three-point lift at ends declared	11,645 lb · 5,282 kg	22,487 lb · 10,200 kg	+93% MF 8180 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	20,439 lb · 9,271 kg	21,539 lb · 9,770 kg	+5% MF 8180 A
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	116.1 in · 2,950 mm	121.1 in · 3,075 mm	—
Length declared	216.0 in · 5,487 mm	207.0 in · 5,257 mm	—
Width declared	118.6 in · 3,012 mm	99.1 in · 2,518 mm	+20% 8410
Height declared	121.1 in · 3,075 mm	123.4 in · 3,135 mm	—
Ground clearance declared	15.9 in · 405 mm	20.1 in · 510 mm	+26% MF 8180 A
Fuel tank declared	540.0 qt · 511.0 L	433.2 qt · 410.0 L	+25% 8410

Source

Source