10 material differences · fewer than 12
Tractor oneJohn Deere 84101999–2002No measured PTO figureTractor twoLamborghini 265 Traction1994–1998No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1999–2002; 1994–1998). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 8410 | 265 Traction | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 266.5 hp | 259.4 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-17 | Cummins 6 CTA 8.3 A | differs |
| Displacement declared | 8.13 L | 8.27 L | — |
| Maximum torque declared | 829 lb·ft · 1,124 N·m | 660 lb·ft · 895 N·m | +26% 8410 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Pedal operated hydraulic wet John Deere multi-plate clutch | Oil-cooled Funk multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.8 gpm · 120.4 L/min | — | — |
| Pressure declared | 3,379 psi · 233 bar | 2,756 psi · 190 bar | +23% 8410 |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,439 lb · 9,271 kg | 19,872 lb · 9,014 kg | — |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 26,455 lb · 12,000 kg | +17% 8410 |
| Wheelbase declared | 116.1 in · 2,950 mm | 116.1 in · 2,950 mm | — |
| Length declared | 216.0 in · 5,487 mm | 194.0 in · 4,928 mm | +11% 8410 |
| Width declared | 118.6–129.3 in · 3,012–3,283 mm | 96.1 in · 2,440 mm | differs |
| Ground clearance declared | 15.9 in · 405 mm | 14.8 in · 376 mm | +8% 8410 |
| Fuel tank declared | 540.0 qt · 511.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 8410 sources
- Source: Traktorenlexikon, “John Deere 8410”
- Source: OECD test report 1936, 2000
Lamborghini 265 Traction sources
- Source: Traktorenlexikon, “Lamborghini Traction 265”
- Source: Traktorenlexikon, “Massey Ferguson MF 9240”