9 material differences · fewer than 12
Tractor oneJohn Deere 83302006–2009No measured PTO figureTractor twoJohn Deere 84101999–2002No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2006–2009; 1999–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 8330 | 8410 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 266.5 hp | 266.5 hp | — |
| Engine declared | John Deere PowerTech-Plus 6.090 HRW-02 | John Deere-PowerTech 6.081 HRW-17 | differs |
| Displacement declared | 8.98 L | 8.13 L | +10% 8330 |
| Maximum torque declared | 836 lb·ft · 1,133 N·m | 829 lb·ft · 1,124 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal operated hydraulic wet John Deere multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 31.8 gpm · 120.4 L/min | — |
| Pressure declared | 3,002 psi · 207 bar | 3,379 psi · 233 bar | +13% 8410 |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 23,307 lb · 10,572 kg | 20,439 lb · 9,271 kg | +14% 8330 |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 120.1 in · 3,050 mm | 116.1 in · 2,950 mm | — |
| Length declared | 233.8 in · 5,938 mm | 216.0 in · 5,487 mm | +8% 8330 |
| Width declared | 118.6–125.6 in · 3,012–3,190 mm | 118.6–129.3 in · 3,012–3,283 mm | — |
| Ground clearance declared | 13.2 in · 336 mm | 15.9 in · 405 mm | +21% 8410 |
| Fuel tank declared | 720.0 qt · 681.4 L | 540.0 qt · 511.0 L | +33% 8330 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 8330 sources
- Source: Traktorenlexikon, “John Deere 8330”
John Deere 8410 sources
- Source: Traktorenlexikon, “John Deere 8410”
- Source: OECD test report 1936, 2000