John Deere 8200 T vs New Holland T 7060
13 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (42%); the drive differs (Tracks; 4WD); they were not built in overlapping years (1997–1998; 2007–2011); the 8200 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 8200 T | T 7060 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 207.3 hp | 210.1 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-03 | IVECO-NEF 667 TA (TIER-III) | differs |
| Displacement declared | 8.13 L | 6.73 L | +21% 8200 T |
| Maximum torque declared | 659 lb·ft · 893 N·m | 622 lb·ft · 843 N·m | +6% 8200 T |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Pedal-operated, hydraulic-wet John Deere multi-disc clutch | Electro-hydraulically operated wet Case-New Holland multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.1 gpm · 117.7 L/min | — | — |
| Pressure declared | 3,379 psi · 233 bar | — | — |
| Three-point lift at ends declared | 15,763 lb · 7,150 kg | 19,063 lb · 8,647 kg | +21% T 7060 |
| Rear PTO speeds declared | 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 25,589 lb · 11,607 kg | 18,078 lb · 8,200 kg | +42% 8200 T |
| Maximum permissible mass declared | — | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 113.5 in · 2,884 mm | +28% T 7060 |
| Length declared | 216.0 in · 5,487 mm | 189.6 in · 4,816 mm | +14% 8200 T |
| Width declared | 102.0 in · 2,591 mm | 84.1 in · 2,135 mm | +21% 8200 T |
| Height declared | 123.4 in · 3,135 mm | 119.9 in · 3,045 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 16.5 in · 420 mm | +17% T 7060 |
| Fuel tank declared | 519.9 qt · 492.0 L | 428.0 qt · 405.0 L | +21% 8200 T |
John Deere 8200 T sources
Source
- Source: Traktorenlexikon, “John Deere 8200T”
- Source: OECD test report 1781, 1998
New Holland T 7060 sources
Source
- Source: Traktorenlexikon, “New Holland T7060 Power Command”