14 material differences
Tractor oneJohn Deere 8200 T1997–1998No measured PTO figureTractor twoNew Holland-Fiat G 2101993–2003No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (29%); the drive differs (Tracks; 4WD); the 8200 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
14 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8200 T | G 210 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 207.3 hp | 207.3 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-03 | New Holland VA 456 TC/AC | differs |
| Displacement declared | 8.13 L | 7.49 L | +9% 8200 T |
| Maximum torque declared | 659 lb·ft · 893 N·m | 696 lb·ft · 943 N·m | +6% G 210 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated, hydraulic-wet John Deere multi-disc clutch | Electro-hydraulically operated Funk multi-disc clutch running in an oil bath | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.1 gpm · 117.7 L/min | 27.4 gpm · 103.9 L/min | +13% 8200 T |
| Pressure declared | 3,379 psi · 233 bar | 2,799 psi · 193 bar | +21% 8200 T |
| Three-point lift, at the coupling points declared | 15,763 lb · 7,150 kg | 20,086 lb · 9,111 kg | +27% G 210 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 25,589 lb · 11,607 kg | 19,842 lb · 9,000 kg | +29% 8200 T |
| Maximum permissible mass declared | — | 30,093 lb · 13,650 kg | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 122.6 in · 3,115 mm | +38% G 210 |
| Length declared | 216.0 in · 5,487 mm | 230.3 in · 5,850 mm | +7% G 210 |
| Width declared | 102.0–109.3 in · 2,591–2,775 mm | 100.8 in · 2,560 mm | differs |
| Height, over the cab declared | 123.4 in · 3,135 mm | 122.0 in · 3,100 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 20.0 in · 509 mm | +41% G 210 |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 519.9 qt · 492.0 L | 439.6 qt · 416.0 L | +18% 8200 T |
John Deere 8200 T sources
Source
- Source: Traktorenlexikon, “John Deere 8200T”
- Source: OECD test report 1781, 1998
New Holland-Fiat G 210 sources
Source
- Source: Traktorenlexikon, “Fiatagri G210”