John Deere 820 vs WHITE 2-35
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 820 and the 2-35 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 820 | 2-35 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 31.5 hp | 30.6 hp | — |
| Engine declared | John Deere M 4 3 L 9 or 3.152 DL-01 | ISUZU 3 AB-1 | differs |
| Displacement declared | 2.47 L | 1.78 L | +39% 820 |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated dry Fichtel & Sachs single disc clutch | Foot-operated two-stage dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 6.9 gpm · 26.0 L/min | 6.6 gpm · 25.0 L/min | — |
| Pressure declared | 1,944 psi · 134 bar | — | — |
| Three-point lift at ends declared | 2,745 lb · 1,245 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,740 lb · 2,150 kg | 2,690 lb · 1,220 kg | +76% 820 |
| Maximum permissible mass declared | 7,716 lb · 3,500 kg | — | — |
| Wheelbase declared | 74.4 in · 1,890 mm | 69.0 in · 1,753 mm | +8% 820 |
| Length declared | 134.8 in · 3,425 mm | 122.0 in · 3,099 mm | +11% 820 |
| Width declared | 59.1 in · 1,500 mm | 61.0 in · 1,549 mm | — |
| Height declared | 59.6 in · 1,515 mm | 80.0 in · 2,032 mm | +34% 2-35 |
| Ground clearance declared | 15.7 in · 400 mm | 15.0 in · 381 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 9.0 ft · 2.75 m | — |
| Fuel tank declared | 66.0 qt · 62.5 L | 31.7 qt · 30.0 L | +108% 820 |
John Deere 820 sources
Source
- Source: Traktorenlexikon, “John Deere 820”
WHITE 2-35 sources
Source
- Source: Traktorenlexikon, “White 2-35”