John Deere 8110 vs WHITE 6195

10 material differences · fewer than 12

Tractor one

1999–2002

No measured PTO figure

Tractor two

1993–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 8110 and the 6195 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

John Deere 8110 and WHITE 6195, field by field
Field	8110	6195	Gap
Engine
Engine power, claimed claimed	192.4 hp	192.3 hp	—
Engine declared	John Deere-PowerTech 6.081 HRW-11	Cummins 6 CTA 8.3 A	differs
Displacement declared	8.13 L	8.27 L	—
Maximum torque declared	586 lb·ft · 794 N·m	640 lb·ft · 868 N·m	+9% 6195
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal operated hydraulic wet John Deere multi-disc clutch	Hydraulically operated wet Funk multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	31.8 gpm · 120.4 L/min	21.1 gpm · 79.9 L/min	+51% 8110
Pressure declared	2,683 psi · 185 bar	2,973 psi · 205 bar	+11% 6195
Three-point lift at ends declared	—	8,186 lb · 3,713 kg	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,346 lb · 8,775 kg	18,678 lb · 8,472 kg	—
Maximum permissible mass declared	30,865 lb · 14,000 kg	—	—
Wheelbase declared	116.1 in · 2,950 mm	115.0 in · 2,921 mm	—
Length declared	216.0 in · 5,487 mm	192.7 in · 4,895 mm	+12% 8110
Width declared	118.6 in · 3,012 mm	115.6 in · 2,935 mm	—
Height declared	121.7 in · 3,090 mm	124.7 in · 3,167 mm	—
Ground clearance declared	16.5 in · 420 mm	18.1 in · 460 mm	+10% 6195
Fuel tank declared	540.0 qt · 511.0 L	387.8 qt · 367.0 L	+39% 8110

Source

Source