John Deere 8110 vs Lamborghini 200 Champion

10 material differences · fewer than 12

Tractor one

1999–2002

No measured PTO figure

Tractor two

2000–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 8110 and the 200 Champion → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 8110 and Lamborghini 200 Champion, field by field
Field	8110	200 Champion	Gap
Engine
Engine power, claimed claimed	192.4 hp	192.3 hp	—
Engine declared	John Deere-PowerTech 6.081 HRW-11	SAME 1000.6 WTI-3 V	differs
Displacement declared	8.13 L	6.00 L	+36% 8110
Maximum torque declared	586 lb·ft · 794 N·m	597 lb·ft · 810 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal operated hydraulic wet John Deere multi-disc clutch	Hydraulically operated wet multiple-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	31.8 gpm · 120.4 L/min	—	—
Pressure declared	2,683 psi · 185 bar	3,046 psi · 210 bar	+14% 200 Champion
Three-point lift at ends declared	—	22,046 lb · 10,000 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	19,346 lb · 8,775 kg	15,873 lb · 7,200 kg	+22% 8110
Maximum permissible mass declared	30,865 lb · 14,000 kg	—	—
Wheelbase declared	116.1 in · 2,950 mm	112.2 in · 2,850 mm	—
Length declared	216.0 in · 5,487 mm	191.4 in · 4,861 mm	+13% 8110
Width declared	118.6 in · 3,012 mm	95.5 in · 2,426 mm	+24% 8110
Height declared	121.7 in · 3,090 mm	116.9 in · 2,970 mm	—
Ground clearance declared	16.5 in · 420 mm	23.4 in · 594 mm	+41% 200 Champion
Fuel tank declared	540.0 qt · 511.0 L	422.7 qt · 400.0 L	+28% 8110

Source

Source