John Deere 7800 (A) vs Massey Ferguson MF 3670 (A)

7 material differences · fewer than 12

Tractor one

1992–1997

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 7800 (A) and the MF 3670 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

John Deere 7800 (A) and Massey Ferguson MF 3670 (A), field by field
Field	7800 (A)	MF 3670 (A)	Gap
Engine
Engine power, claimed claimed	167.8 hp	167.8 hp	—
Engine declared	John Deere 6.076 TRW-30	Valmet 620 DS	differs
Displacement declared	7.63 L	6.60 L	+16% 7800 (A)
Maximum torque declared	528 lb·ft · 716 N·m	449 lb·ft · 609 N·m	+18% 7800 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled VALEO single-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	28.8 gpm · 108.9 L/min	—	—
Pressure declared	2,538 psi · 175 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	12,478 lb · 5,660 kg	14,110 lb · 6,400 kg	+13% MF 3670 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,528 lb · 6,590 kg	14,573 lb · 6,610 kg	—
Maximum permissible mass declared	25,353 lb · 11,500 kg	—	—
Wheelbase declared	110.2 in · 2,800 mm	115.2 in · 2,925 mm	—
Length declared	189.0 in · 4,800 mm	198.8 in · 5,050 mm	—
Width declared	98.4 in · 2,500 mm	94.5 in · 2,400 mm	—
Height declared	121.3 in · 3,080 mm	118.1 in · 3,000 mm	—
Ground clearance declared	24.7 in · 628 mm	16.9 in · 430 mm	+46% 7800 (A)
Fuel tank declared	363.5 qt · 344.0 L	323.3 qt · 306.0 L	+12% 7800 (A)

Source

Source