John Deere 7700 (A) or Steyr CVT 150?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 7700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the CVT 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Steyr CVT 150 suits loader and hydraulic implement work better on this data: 24% (23.8 L/min / 6.3 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 7700 (A) | CVT 150 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 110.4 kW (148.0 hp)Traktorenlexikon, “John Deere 7700” | 110.4 kW (148.0 hp)Traktorenlexikon, “Steyr CVT 150” | Not comparableNot comparable on power at the PTO shaft: the 7700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the CVT 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 7700 (A) and the CVT 150. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 7700 (A) and the CVT 150. |
| Which pumps more oil for implements? | 97.7 L/min (25.8 gpm)Traktorenlexikon, “John Deere 7700” | 121.5 L/min (32.1 gpm)Traktorenlexikon, “Steyr CVT 150” | AheadThe Steyr CVT 150 has 24% more hydraulic flow (23.8 L/min / 6.3 gpm) than the John Deere 7700 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 5,560 kg (12,258 lb)Traktorenlexikon, “John Deere 7700” | — | No figureNo call on three-point lift: no figure on record for the CVT 150. |
| Which is heavier, for traction? | 6,510 kg (14,352 lb)Traktorenlexikon, “John Deere 7700” | 6,270 kg (13,823 lb)Traktorenlexikon, “Steyr CVT 150” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 11,500 kg (25,353 lb)Traktorenlexikon, “John Deere 7700” | 11,000 kg (24,251 lb)Traktorenlexikon, “Steyr CVT 150” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 12 to 20 forwardTraktorenlexikon, “John Deere 7700” | Stepless (CVT)Traktorenlexikon, “Steyr CVT 150” | DifferTransmissions differ in kind: the John Deere 7700 (A) has 12 to 20 forward gears and the Steyr CVT 150 is stepless (CVT) — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 7700 (A) and the CVT 150. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “John Deere 7700” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Steyr CVT 150” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “John Deere 7700” | 540 rpm / 1000 rpmTraktorenlexikon, “Steyr CVT 150” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “John Deere 7700” | independentTraktorenlexikon, “Steyr CVT 150” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 7700” | 4WDTraktorenlexikon, “Steyr CVT 150” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1992–1997 | 2000–2003 | Ahead (a fact, not an advantage)The Steyr CVT 150 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Steyr CVT 150 has 24% more hydraulic flow (23.8 L/min / 6.3 gpm) than the John Deere 7700 (A) (both pump flow, as stated by the source).
- The Steyr CVT 150 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the John Deere 7700 (A) has 12 to 20 forward gears and the Steyr CVT 150 is stepless (CVT) — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 7700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the CVT 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.
← Every figure for both machines, side by side, with sources