John Deere 7700 (A) or Massey Ferguson MF 3650?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 7700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3650 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The John Deere 7700 (A) suits loader and hydraulic implement work better on this data: 68% (39.4 L/min / 10.4 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 7700 (A) and Massey Ferguson MF 3650, with the call on each
Question7700 (A)MF 3650Call
Which puts more power through the PTO shaft?110.4 kW (148.0 hp)Traktorenlexikon, “John Deere 7700”110.4 kW (148.0 hp)Traktorenlexikon, “Massey Ferguson MF 3650”Not comparableNot comparable on power at the PTO shaft: the 7700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3650 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7700 (A) and the MF 3650.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7700 (A) and the MF 3650.
Which pumps more oil for implements?97.7 L/min (25.8 gpm)Traktorenlexikon, “John Deere 7700”58.3 L/min (15.4 gpm)Traktorenlexikon, “Massey Ferguson MF 3650”AheadThe John Deere 7700 (A) has 68% more hydraulic flow (39.4 L/min / 10.4 gpm) than the Massey Ferguson MF 3650 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,560 kg (12,258 lb)Traktorenlexikon, “John Deere 7700”5,540 kg (12,214 lb)Traktorenlexikon, “Massey Ferguson MF 3650”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?6,510 kg (14,352 lb)Traktorenlexikon, “John Deere 7700”5,345 kg (11,784 lb)Traktorenlexikon, “Massey Ferguson MF 3650”Ahead (a fact, not an advantage)The John Deere 7700 (A) is 22% heavier (1,165 kg / 2,568 lb) than the Massey Ferguson MF 3650 (both unladen weight, as stated by the source).
Which may carry more ballast and load?11,500 kg (25,353 lb)Traktorenlexikon, “John Deere 7700”No figureNo call on maximum permissible mass: no figure on record for the MF 3650.
Which has the wider choice of gears?12 to 20Traktorenlexikon, “John Deere 7700”16Traktorenlexikon, “Massey Ferguson MF 3650”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7700 (A) and the MF 3650.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “John Deere 7700”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3650”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “John Deere 7700”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3650”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 7700”independentTraktorenlexikon, “Massey Ferguson MF 3650”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “John Deere 7700”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3650”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–19971987–1990Ahead (a fact, not an advantage)The John Deere 7700 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 7700 (A) has 68% more hydraulic flow (39.4 L/min / 10.4 gpm) than the Massey Ferguson MF 3650 (both pump flow, as stated by the source).
  • The John Deere 7700 (A) is 22% heavier (1,165 kg / 2,568 lb) than the Massey Ferguson MF 3650 (both unladen weight, as stated by the source).
  • The John Deere 7700 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 7700 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3650 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources