John Deere 7410 vs VALMET 8100

12 material differences

Tractor one

1997–2002

109.4 hp

Measured at the PTO · OECD Test 1750

Tractor two

1990–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 7410 and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 7410 and VALMET 8100, field by field
Field	7410	8100	Gap
Measured performance
PTO power, measured measured	109.4 hp	—	—
Drawbar power, measured measured	98.2 hp	—	—
Engine
Engine power, claimed claimed	—	118.4 hp	—
Engine declared	John Deere 6.068 TRW-51	VALMET 620 D	differs
Displacement declared	6.79 L	6.59 L	—
Maximum torque declared	361 lb·ft · 490.0 N·m	311 lb·ft · 421 N·m	+16% 7410
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated hydraulic wet John Deere multi-disc clutch	Pedal-operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	26.9 gpm · 101.8 L/min	17.8 gpm · 67.4 L/min	+51% 7410
Pressure declared	2,538 psi · 175 bar	2,901 psi · 200 bar	+14% 8100
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,490–12,738 lb · 5,212–5,778 kg	10,141 lb · 4,600 kg	differs
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	103.3–111.8 in · 2,625–2,840 mm	100.7 in · 2,558 mm	differs
Length declared	174.6 in · 4,435 mm	186.8 in · 4,745 mm	+7% 8100
Width declared	96.0 in · 2,438 mm	86.6 in · 2,200 mm	+11% 7410
Height declared	113.4 in · 2,880 mm	108.7 in · 2,760 mm	—
Ground clearance declared	14.2–15.7 in · 360–400 mm	18.7 in · 475 mm	differs
Turning radius, braked declared	—	15.5 ft · 4.71 m	—
Fuel tank declared	199.7 qt · 189.0 L	174.4 qt · 165.0 L	+15% 7410

Source

Source