John Deere 7410 vs Massey Ferguson MF 6180 (A)
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 7410 and the MF 6180 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 7410 | MF 6180 (A) | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 109.4 hp | — | — |
| Drawbar power, measured measured | 98.2 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | — | 118.4 hp | — |
| Engine declared | John Deere 6.068 TRW-51 | PERKINS 1006-6 TLR 2 | differs |
| Displacement declared | 6.79 L | 5.99 L | +13% 7410 |
| Maximum torque declared | 361 lb·ft · 490.0 N·m | 350 lb·ft · 474 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated hydraulic wet John Deere multi-disc clutch | Mechanically operated dry VALEO single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.9 gpm · 101.8 L/min | 13.9 gpm · 52.7 L/min | +93% 7410 |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Three-point lift at ends declared | — | 10,781 lb · 4,890 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000/540E/1000E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,490–12,738 lb · 5,212–5,778 kg | 10,218 lb · 4,635 kg | differs |
| Maximum permissible mass declared | — | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 103.3–111.8 in · 2,625–2,840 mm | 106.1 in · 2,695 mm | differs |
| Length declared | 174.6 in · 4,435 mm | 170.2 in · 4,323 mm | — |
| Width declared | 96.0 in · 2,438 mm | 89.0 in · 2,260 mm | +8% 7410 |
| Height declared | 113.4 in · 2,880 mm | 110.2 in · 2,800 mm | — |
| Ground clearance declared | 14.2–15.7 in · 360–400 mm | 17.9 in · 455 mm | differs |
| Fuel tank declared | 199.7 qt · 189.0 L | 182.8 qt · 173.0 L | +9% 7410 |
John Deere 7410 sources
Source
- Source: OECD test report 1750, 1998
- Source: Traktorenlexikon, “John Deere 7410”
- Source: OECD test report 1751, 1998
Massey Ferguson MF 6180 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 6180”
- Source: Traktorenlexikon, “Massey Ferguson MF 3120”