10 material differences · fewer than 12

Tractor oneJohn Deere 7400 (A)1993–1997No measured PTO figureTractor twoVALMET 81001990–1996No measured PTO figure

Which should you choose?

Read our verdict on the 7400 (A) and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 7400 (A) and VALMET 8100, field by field
Field	7400 (A)	8100	Gap
Engine
Engine power, claimed claimed	118.4 hp	118.4 hp	—
Engine declared	John Deere 6.068 TRW-02	VALMET 620 D	differs
Displacement declared	6.79 L	6.59 L	—
Maximum torque declared	350 lb·ft · 474 N·m	311 lb·ft · 421 N·m	+13% 7400 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry Fichtel & Sachs single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	25.9 gpm · 98.0 L/min	17.8 gpm · 67.4 L/min	+45% 7400 (A)
Pressure declared	2,538 psi · 175 bar	2,901 psi · 200 bar	+14% 8100
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,663 lb · 5,744 kg	10,141 lb · 4,600 kg	+25% 7400 (A)
Maximum permissible mass declared	19,842 lb · 9,000 kg	16,535 lb · 7,500 kg	+20% 7400 (A)
Wheelbase declared	103.3 in · 2,625 mm	100.7 in · 2,558 mm	—
Length declared	174.6 in · 4,435 mm	186.8 in · 4,745 mm	+7% 8100
Width declared	110.6–120.3 in · 2,808–3,056 mm	86.6–103.9 in · 2,200–2,640 mm	differs
Height, over the cab declared	113.4 in · 2,880 mm	108.7 in · 2,760 mm	—
Ground clearance declared	14.2 in · 360 mm	18.7 in · 475 mm	+32% 8100
Turning radius, braked declared	—	15.5 ft · 4.71 m	—
Fuel tank declared	215.6 qt · 204.0 L	174.4 qt · 165.0 L	+24% 7400 (A)

Source

Source