John Deere 7210 vs Renault 120-54 TX

9 material differences · fewer than 12

Tractor one

1997–2002

No measured PTO figure

Tractor two

1989–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 7210 and the 120-54 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 7210 and Renault 120-54 TX, field by field
Field	7210	120-54 TX	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	John Deere 6.068 TRW-50	MWM D 226-6	differs
Displacement declared	6.79 L	6.23 L	+9% 7210
Maximum torque declared	324 lb·ft · 439 N·m	299 lb·ft · 405 N·m	+8% 7210
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, hydraulic-wet John Deere multi-disc clutch	Dry LuK double clutch type DT 330/330	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	27.3 gpm · 103.3 L/min	10.9 gpm · 41.1 L/min	+151% 7210
Pressure declared	2,944–3,031 psi · 203–209 bar	—	—
Three-point lift at ends declared	—	19,511 lb · 8,850 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,490 lb · 5,212 kg	11,817 lb · 5,360 kg	—
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	111.8 in · 2,840 mm	107.9 in · 2,740 mm	—
Length declared	174.6 in · 4,435 mm	200.0 in · 5,080 mm	+15% 120-54 TX
Width declared	96.0 in · 2,438 mm	97.2 in · 2,470 mm	—
Height declared	113.4 in · 2,880 mm	115.0 in · 2,920 mm	—
Ground clearance declared	15.7 in · 400 mm	20.9 in · 530 mm	+33% 120-54 TX
Turning radius, braked declared	—	16.4 ft · 5.00 m	—
Fuel tank declared	199.7 qt · 189.0 L	158.5 qt · 150.0 L	+26% 7210

Source

Source