John Deere 7210 or Massey Ferguson MF 2645?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 7210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2645 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 7210 and Massey Ferguson MF 2645, with the call on each
Question7210MF 2645Call
Which puts more power through the PTO shaft?81 kW (109 hp)Traktorenlexikon, “John Deere 7210”81 kW (109 hp)Traktorenlexikon, “Massey Ferguson MF 2645”Not comparableNot comparable on power at the PTO shaft: the 7210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2645 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7210 and the MF 2645.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7210 and the MF 2645.
Which pumps more oil for implements?103.3 L/min (27.3 gpm)Traktorenlexikon, “John Deere 7210”No figureNo call on hydraulic flow: no figure on record for the MF 2645.
Which lifts more on the three-point hitch?6,300 kg (13,889 lb)Traktorenlexikon, “Massey Ferguson MF 2645”No figureNo call on three-point lift: no figure on record for the 7210.
Which is heavier, for traction?5,212 kg (11,490 lb)Traktorenlexikon, “John Deere 7210”5,630 kg (12,412 lb)Traktorenlexikon, “Massey Ferguson MF 2645”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 2645”No figureNo call on maximum permissible mass: no figure on record for the 7210.
Which has the wider choice of gears?12 to 16Traktorenlexikon, “John Deere 7210”16Traktorenlexikon, “Massey Ferguson MF 2645”Sources disagreeNo call on forward gears: sources disagree on the figure for the 7210.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7210 and the MF 2645.
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “John Deere 7210”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 2645”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “John Deere 7210”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 2645”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 2645”No figureNo call on PTO independence: not stated for the 7210.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “John Deere 7210”; OECD test report 1748, 1998; OECD test report 1749, 19984WDTraktorenlexikon, “Massey Ferguson MF 2645”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20021985–1986Ahead (a fact, not an advantage)The John Deere 7210 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 7210 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 7210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2645 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No call on forward gears: sources disagree on the figure for the 7210.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources