John Deere 7210 vs Massey Ferguson MF 4270 (A)

12 material differences

Tractor one

1997–2002

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 7210 and the MF 4270 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 7210 and Massey Ferguson MF 4270 (A), field by field
Field	7210	MF 4270 (A)	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	John Deere 6.068 TRW-50	Perkins 1006-6 HR3	differs
Displacement declared	6.79 L	5.99 L	+13% 7210
Maximum torque declared	324 lb·ft · 439 N·m	305 lb·ft · 414 N·m	+6% 7210
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, hydraulic-wet John Deere multi-disc clutch	Pedal-operated, dry and air-cooled single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Hydraulic control declared	Load sensing	—	—
Pump flow declared	27.3 gpm · 103.3 L/min	—	—
Pressure declared	2,944–3,031 psi · 203–209 bar	—	—
Three-point lift at ends declared	—	10,185 lb · 4,620 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,490 lb · 5,212 kg	8,554 lb · 3,880 kg	+34% 7210
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	111.8 in · 2,840 mm	102.7 in · 2,609 mm	+9% 7210
Length declared	174.6 in · 4,435 mm	172.8 in · 4,390 mm	—
Width declared	96.0 in · 2,438 mm	78.3 in · 1,990 mm	+23% 7210
Height declared	113.4 in · 2,880 mm	106.8 in · 2,713 mm	+6% 7210
Ground clearance declared	15.7 in · 400 mm	13.8 in · 350 mm	+14% 7210
Fuel tank declared	199.7 qt · 189.0 L	213.5 qt · 202.0 L	+7% MF 4270 (A)

Source

Source