12 material differences

Tractor oneJohn Deere 7200 (A)1993–1997No measured PTO figureTractor twoVALMET 69001997–2000No measured PTO figure

Which should you choose?

Read our verdict on the 7200 (A) and the 6900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 7200 (A) and VALMET 6900, field by field
Field	7200 (A)	6900	Gap
Engine
Engine power, claimed claimed	100.7 hp	101 hp	—
Engine declared	John Deere 6.059 TRW-01 or 6.068 TRW-01	VALMET 620 DRE	differs
Displacement declared	—	6.59 L	—
Maximum torque declared	311 lb·ft · 421 N·m	288 lb·ft · 390 N·m	+8% 7200 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, hydraulic wet John Deere multi-disc clutch	Pedal-operated, dry FICHTEL & SACHS single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	26.2 gpm · 99.2 L/min	18.0 gpm · 68.2 L/min	+45% 7200 (A)
Pressure declared	2,538 psi · 175 bar	2,901 psi · 200 bar	+14% 6900
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,679 lb · 5,751 kg	9,744 lb · 4,420 kg	+30% 7200 (A)
Maximum permissible mass declared	19,842 lb · 9,000 kg	16,535 lb · 7,500 kg	+20% 7200 (A)
Wheelbase declared	112.2 in · 2,850 mm	100.8 in · 2,560 mm	+11% 7200 (A)
Length declared	174.6 in · 4,435 mm	187.0 in · 4,750 mm	+7% 6900
Width declared	96.0–105.7 in · 2,438–2,686 mm	78.1–101.8 in · 1,985–2,585 mm	differs
Height, over the cab declared	113.4 in · 2,880 mm	109.1 in · 2,771 mm	—
Ground clearance declared	14.2 in · 360 mm	18.1 in · 460 mm	+28% 6900
Turning radius, braked declared	—	16.7 ft · 5.10 m	—
Fuel tank declared	215.6 qt · 204.0 L	174.4 qt · 165.0 L	+24% 7200 (A)

Source

Source