10 material differences · fewer than 12
Tractor oneJohn Deere 7200 (A)1993–1997No measured PTO figureTractor twoRenault Temis 5502000–2003No measured PTO figure
Which should you choose?
Read our verdict on the 7200 (A) and the Temis 550 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7200 (A) | Temis 550 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 100.7 hp | 100.7 hp | — |
| Engine declared | John Deere 6.059 TRW-01 or 6.068 TRW-01 | JOHN DEERE 4045 TRT | differs |
| Displacement declared | — | 4.53 L | — |
| Maximum torque declared | 311 lb·ft · 421 N·m | 299 lb·ft · 405 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Pedal-operated, hydraulic wet John Deere multi-disc clutch | Dry LuK double clutch type 310/310 | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.2 gpm · 99.2 L/min | 14.7 gpm · 55.7 L/min | +78% 7200 (A) |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,679 lb · 5,751 kg | 11,773 lb · 5,340 kg | +8% 7200 (A) |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | 13,448 lb · 6,100 kg | +48% 7200 (A) |
| Wheelbase declared | 112.2 in · 2,850 mm | 97.6 in · 2,480 mm | +15% 7200 (A) |
| Length declared | 174.6 in · 4,435 mm | 199.8 in · 5,074 mm | +14% Temis 550 |
| Width declared | 96.0–105.7 in · 2,438–2,686 mm | 70.9–100.4 in · 1,800–2,550 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 19.3 in · 490 mm | +36% Temis 550 |
| Turning radius, braked declared | — | 13.3 ft · 4.05 m | — |
| Fuel tank declared | 215.6 qt · 204.0 L | 162.7 qt · 154.0 L | +32% 7200 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 7200 (A) sources
- Source: Traktorenlexikon, “John Deere 7200”
Renault Temis 550 sources
- Source: Traktorenlexikon, “Renault Témis 550X”