John Deere 7200 (A) vs Landini 105 DT

11 material differences · fewer than 12

Tractor one

1993–1997

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 7200 (A) and the 105 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 7200 (A) and Landini 105 DT, field by field
Field	7200 (A)	105 DT	Gap
Engine
Engine power, claimed claimed	100.7 hp	101.6 hp	—
Engine declared	John Deere 6.059 TRW-01 or 6.068 TRW-01	Perkins 1006.6 HR-4	differs
Displacement declared	—	5.99 L	—
Maximum torque declared	311 lb·ft · 421 N·m	291 lb·ft · 395 N·m	+7% 7200 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated, hydraulic wet John Deere multi-disc clutch	pedal-operated dry single-disc clutch, configured as a driving clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	26.2 gpm · 99.2 L/min	16.2 gpm · 61.5 L/min	+61% 7200 (A)
Pressure declared	2,538 psi · 175 bar	2,901 psi · 200 bar	+14% 105 DT
Three-point lift at ends declared	—	14,330 lb · 6,500 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,679 lb · 5,751 kg	11,927 lb · 5,410 kg	+6% 7200 (A)
Maximum permissible mass declared	19,842 lb · 9,000 kg	22,928 lb · 10,400 kg	+16% 105 DT
Wheelbase declared	112.2 in · 2,850 mm	110.2 in · 2,800 mm	—
Length declared	174.6 in · 4,435 mm	188.2 in · 4,780 mm	+8% 105 DT
Width declared	96.0 in · 2,438 mm	92.1 in · 2,340 mm	—
Height declared	113.4 in · 2,880 mm	113.0 in · 2,870 mm	—
Ground clearance declared	14.2 in · 360 mm	21.3 in · 540 mm	+50% 105 DT
Turning radius, braked declared	—	19.2 ft · 5.85 m	—
Fuel tank declared	215.6 qt · 204.0 L	190.2 qt · 180 L	+13% 7200 (A)

Source

Source