John Deere 6630 vs VALMET 8200

12 material differences

Tractor one

2007–2012

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 6630 and the 8200 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 6630 and VALMET 8200, field by field
Field	6630	8200	Gap
Engine
Engine power, claimed claimed	128.3 hp	128.2 hp	—
Engine declared	John Deere PowrTech 6.068 HL-280/V2-CR	VALMET 634 D	differs
Displacement declared	6.79 L	7.37 L	+9% 8200
Maximum torque declared	389 lb·ft · 527 N·m	361 lb·ft · 490 N·m	+8% 6630
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, hydraulic wet Perma-Clutch II as multi-disc clutch	Pedal-operated, dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	17.8 gpm · 67.4 L/min	—
Pressure declared	3,408 psi · 235 bar	2,901 psi · 200 bar	+18% 6630
Rear PTO speeds declared	540E/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,574 lb · 5,250 kg	10,362 lb · 4,700 kg	+12% 6630
Maximum permissible mass declared	20,944 lb · 9,500 kg	16,535 lb · 7,500 kg	+27% 6630
Wheelbase declared	104.3 in · 2,650 mm	100.7 in · 2,558 mm	—
Length declared	186.1 in · 4,728 mm	186.8 in · 4,745 mm	—
Width declared	91.2 in · 2,316 mm	86.6 in · 2,200 mm	+5% 6630
Height declared	111.5 in · 2,833 mm	108.7 in · 2,760 mm	—
Ground clearance declared	22.4 in · 570 mm	18.7 in · 475 mm	+20% 6630
Turning radius, braked declared	—	15.5 ft · 4.71 m	—
Fuel tank declared	218.7 qt · 207.0 L	174.4 qt · 165.0 L	+25% 6630

Source

Source