12 material differences

Tractor oneJohn Deere 66302007–2012No measured PTO figureTractor twoSteyr CVT 1302000–2003No measured PTO figure

Which should you choose?

Read our verdict on the 6630 and the CVT 130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 6630 and Steyr CVT 130, field by field
Field	6630	CVT 130	Gap
Engine
Engine power, claimed claimed	128.3 hp	128.3 hp	—
Engine declared	John Deere PowrTech 6.068 HL-280/V2-CR	SISU WD 620.82	differs
Displacement declared	6.79 L	6.60 L	—
Maximum torque declared	389 lb·ft · 527 N·m	367 lb·ft · 497 N·m	+6% 6630
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated, hydraulic wet Perma-Clutch II as multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	32.1 gpm · 121.5 L/min	—
Pressure declared	3,408 psi · 235 bar	2,973 psi · 205 bar	+15% 6630
Rear PTO speeds declared	540E/540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,574 lb · 5,250 kg	13,823 lb · 6,270 kg	+19% CVT 130
Maximum permissible mass declared	20,944 lb · 9,500 kg	23,149 lb · 10,500 kg	+11% CVT 130
Wheelbase declared	104.3 in · 2,650 mm	111.1 in · 2,822 mm	+6% CVT 130
Length declared	186.1 in · 4,728 mm	190.9 in · 4,850 mm	—
Width declared	91.2 in · 2,316 mm	97.8–100.4 in · 2,485–2,550 mm	differs
Height, over the cab declared	111.5 in · 2,833 mm	119.5 in · 3,035 mm	+7% CVT 130
Ground clearance declared	22.4 in · 570 mm	19.7 in · 500 mm	+14% 6630
Turning radius, braked declared	—	19.2 ft · 5.84 m	—
Fuel tank declared	218.7 qt · 207.0 L	327.6 qt · 310.0 L	+50% CVT 130

Source

Source