7 material differences · fewer than 12
Tractor oneJohn Deere 65342009–2012No measured PTO figureTractor twoMassey Ferguson MF 5465 A2003–2012No measured PTO figure
Which should you choose?
Read our verdict on the 6534 and the MF 5465 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6534 | MF 5465 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118.4 hp | 118.4 hp | — |
| Engine declared | John Deere PowrTech 4.045 HL/V2-CR | Perkins 1106 C-E 60 TA | differs |
| Displacement declared | 4.53 L | 5.99 L | +32% MF 5465 A |
| Maximum torque declared | 361 lb·ft · 490 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | — | Driving clutch with 5 x 230 mm disc diameter | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Hydraulic control declared | Load sensing | — | — |
| Pressure declared | 3,408 psi · 235 bar | — | — |
| Rear PTO speeds declared | 540E/540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,199 lb · 5,080 kg | 11,960 lb · 5,425 kg | +7% MF 5465 A |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | 18,739 lb · 8,500 kg | — |
| Wheelbase declared | 104.3 in · 2,650 mm | 109.4–111.4 in · 2,780–2,830 mm | differs |
| Length declared | 186.1 in · 4,728 mm | 205.9 in · 5,230 mm | +11% MF 5465 A |
| Width declared | 91.2 in · 2,316 mm | 90.6 in · 2,300 mm | — |
| Ground clearance declared | 23.6 in · 600 mm | 16.9 in · 430 mm | +40% 6534 |
| Fuel tank declared | 218.7 qt · 207.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 6534 sources
- Source: Traktorenlexikon, “John Deere 6534”
- Source: Traktorenlexikon, “John Deere 6430”
Massey Ferguson MF 5465 A sources
- Source: Traktorenlexikon, “Massey Ferguson MF 5465”