10 material differences · fewer than 12

Tractor oneJohn Deere 5510 (A)1997–2000No measured PTO figureTractor twoUTB U-833 DT1994–2004No measured PTO figure

Which should you choose?

Read our verdict on the 5510 (A) and the U-833 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 5510 (A) and UTB U-833 DT, field by field
Field	5510 (A)	U-833 DT	Gap
Engine
Engine power, claimed claimed	87.8 hp	87.8 hp	—
Engine declared	John Deere-PowerTech 4.045 T	UTB 2404.062	differs
Displacement declared	4.52 L	3.76 L	+20% 5510 (A)
Maximum torque declared	236 lb·ft · 320 N·m	232 lb·ft · 314 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.5 gpm · 62.5 L/min	10.6 gpm · 40.0 L/min	+56% 5510 (A)
Pressure declared	3,408 psi · 235 bar	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,720 lb · 3,048 kg	8,907 lb · 4,040 kg	+33% U-833 DT
Wheelbase declared	85.7 in · 2,177 mm	90.2 in · 2,291 mm	—
Length declared	138.2 in · 3,510 mm	163.4 in · 4,150 mm	+18% U-833 DT
Width declared	68.7 in · 1,745 mm	76.3–95.6 in · 1,939–2,429 mm	differs
Height, over the cab declared	100.0 in · 2,540 mm	109.8 in · 2,790 mm	+10% U-833 DT
Ground clearance declared	18.1 in · 460 mm	13.8 in · 350 mm	+31% 5510 (A)
Turning radius, braked declared	—	14.4 ft · 4.40 m	—
Fuel tank declared	71.9 qt · 68.0 L	105.7 qt · 100.0 L	+47% U-833 DT

Source

Source