14 material differences

Tractor oneJohn Deere 5510 (A)1997–2000No measured PTO figureTractor twoURSUS 10441997–1999No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (59%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

14 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 5510 (A) and URSUS 1044, field by field
Field	5510 (A)	1044	Gap
Engine
Engine power, claimed claimed	87.8 hp	89 hp	—
Engine declared	John Deere-PowerTech 4.045 T	URSUS T-4390	differs
Displacement declared	4.52 L	3.86 L	+17% 5510 (A)
Maximum torque declared	236 lb·ft · 320 N·m	249 lb·ft · 338 N·m	+6% 1044
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry double clutch	Pedal-operated, dry hydraulic ZTS-MARTIN single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.5 gpm · 62.5 L/min	—	—
Pressure declared	3,408 psi · 235 bar	2,828 psi · 195 bar	+21% 5510 (A)
Three-point lift, at the coupling points declared	3,616 lb · 1,640 kg	9,094 lb · 4,125 kg	+152% 1044
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,720 lb · 3,048 kg	10,692 lb · 4,850 kg	+59% 1044
Wheelbase declared	85.7 in · 2,177 mm	95.9 in · 2,435 mm	+12% 1044
Length declared	138.2 in · 3,510 mm	164.8 in · 4,185 mm	+19% 1044
Width declared	68.7 in · 1,745 mm	82.2 in · 2,087 mm	+20% 1044
Height, over the cab declared	100.0 in · 2,540 mm	115.4 in · 2,932 mm	+15% 1044
Ground clearance declared	18.1 in · 460 mm	15.0 in · 382 mm	+20% 5510 (A)
Turning radius, braked declared	—	15.7 ft · 4.78 m	—
Fuel tank declared	71.9 qt · 68.0 L	137.4 qt · 130.0 L	+91% 1044

John Deere 5510 (A) sources

Source

Source: Traktorenlexikon, “John Deere 5510 (USA)”

URSUS 1044 sources