10 material differences · fewer than 12
Tractor oneJohn Deere 5500 (A)1995–1997No measured PTO figureTractor twoNew Holland TD 75 D (A)2002–2004No measured PTO figure
Which should you choose?
Read our verdict on the 5500 (A) and the TD 75 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 5500 (A) | TD 75 D (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 72.0 hp | 72.0 hp | — |
| Engine declared | John Deere 4.029 Turbo | IVECO 8045.06-406 | differs |
| Displacement declared | 3.91 L | 3.61 L | +8% 5500 (A) |
| Maximum torque declared | 199 lb·ft · 270 N·m | 153 lb·ft · 208 N·m | +30% 5500 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal operated dry Carraro single plate clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 16.5 gpm · 62.5 L/min | 11.9 gpm · 45.2 L/min | +38% 5500 (A) |
| Pressure declared | 3,408 psi · 235 bar | 3,553 psi · 245 bar | — |
| Three-point lift, at the coupling points declared | 3,803 lb · 1,725 kg | 6,614 lb · 3,000 kg | +74% TD 75 D (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,672 lb · 2,573 kg | 6,010 lb · 2,726 kg | +6% TD 75 D (A) |
| Wheelbase declared | — | 90.7 in · 2,305 mm | — |
| Length declared | 149.2 in · 3,790 mm | 153.0 in · 3,885 mm | — |
| Width declared | 78.8–98.8 in · 2,002–2,510 mm | 75.9–95.6 in · 1,928–2,428 mm | — |
| Ground clearance declared | — | 10.6 in · 270 mm | — |
| Turning radius, braked declared | 11.2 ft · 3.40 m | — | — |
| Fuel tank declared | 91.9 qt · 87.0 L | 97.2 qt · 92.0 L | +6% TD 75 D (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 5500 (A) sources
- Source: Traktorenlexikon, “John Deere 5500 (USA)”
New Holland TD 75 D (A) sources
- Source: Traktorenlexikon, “New Holland TD 75 D”