John Deere 5410 (A) vs VALMET 665
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 5410 (A) and the 665 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 5410 (A) | 665 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79.9 hp | 78.9 hp | — |
| Engine declared | John Deere-PowerTech 4.045 D | VALMET 420 D | differs |
| Displacement declared | 4.52 L | 4.40 L | — |
| Maximum torque declared | 204 lb·ft · 277 N·m | 214 lb·ft · 290 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 16.3 gpm · 61.7 L/min | 13.8 gpm · 52.4 L/min | +18% 5410 (A) |
| Pressure declared | 3,408 psi · 235 bar | 2,901 psi · 200 bar | +18% 5410 (A) |
| Three-point lift at ends declared | 3,616 lb · 1,640 kg | 5,688 lb · 2,580 kg | +57% 665 |
| Rear PTO speeds declared | 540 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,999 lb · 2,721 kg | 7,231 lb · 3,280 kg | +21% 665 |
| Wheelbase declared | 85.7 in · 2,177 mm | 94.1 in · 2,390 mm | +10% 665 |
| Length declared | 125.9 in · 3,198 mm | 157.5 in · 4,000 mm | +25% 665 |
| Width declared | 68.7 in · 1,745 mm | 79.9 in · 2,030 mm | +16% 665 |
| Height declared | 97.0 in · 2,464 mm | 101.2 in · 2,570 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 18.1 in · 460 mm | — |
| Turning radius, braked declared | — | 15.7 ft · 4.80 m | — |
| Fuel tank declared | 71.9 qt · 68.0 L | 77.1 qt · 73.0 L | +7% 665 |
John Deere 5410 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 5410 (USA)”
VALMET 665 sources
Source
- Source: Traktorenlexikon, “Valmet 665”