John Deere 5410 (A) vs VALMET 6100-4

15 material differences

Tractor one

1997–2000

No measured PTO figure

Tractor two

1991–1994

No measured PTO figure

Which should you choose?

Read our verdict on the 5410 (A) and the 6100-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 1 fields identical or within 5%, which is not counted as material

John Deere 5410 (A) and VALMET 6100-4, field by field
Field	5410 (A)	6100-4	Gap
Engine
Engine power, claimed claimed	79.9 hp	77.9 hp	—
Engine declared	John Deere-PowerTech 4.045 D	VALMET 320 DS	differs
Displacement declared	4.52 L	3.30 L	+37% 5410 (A)
Maximum torque declared	204 lb·ft · 277 N·m	229 lb·ft · 310 N·m	+12% 6100-4
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated, dry Fichtel & Sachs single-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.3 gpm · 61.7 L/min	21.2 gpm · 80.3 L/min	+30% 6100-4
Pressure declared	3,408 psi · 235 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	3,616 lb · 1,640 kg	9,601 lb · 4,355 kg	+166% 6100-4
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,999 lb · 2,721 kg	8,818 lb · 4,000 kg	+47% 6100-4
Maximum permissible mass declared	—	13,889 lb · 6,300 kg	—
Wheelbase declared	85.7 in · 2,177 mm	90.6 in · 2,302 mm	+6% 6100-4
Length declared	125.9 in · 3,198 mm	169.1 in · 4,295 mm	+34% 6100-4
Width declared	68.7 in · 1,745 mm	85.2 in · 2,165 mm	+24% 6100-4
Height declared	97.0 in · 2,464 mm	106.1 in · 2,695 mm	+9% 6100-4
Ground clearance declared	18.1 in · 460 mm	16.1 in · 410 mm	+12% 5410 (A)
Turning radius, braked declared	—	13.1 ft · 4.00 m	—
Fuel tank declared	71.9 qt · 68.0 L	167.0 qt · 158.0 L	+132% 6100-4

Source

Source