John Deere 5403 (A) vs VALMET 665

12 material differences

Tractor one

John Deere 5403 (A)

2007–2008

No measured PTO figure

Tractor two

VALMET 665

1992–1997

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (53%); the drive differs (2WD / 4WD; 4WD); they were not built in overlapping years (2007–2008; 1992–1997). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

12 material differences · 1 fields identical or within 5%, which is not counted as material

John Deere 5403 (A) and VALMET 665, field by field
Field5403 (A)665Gap
Engine
Engine power, claimed claimed73.1 hp78.9 hp+8% 665
Engine declaredJohn Deere 3.029 TPYVALMET 420 Ddiffers
Displacement declared2.90 L4.40 L+52% 665
Maximum torque declared214 lb·ft · 290 N·m
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredDry LuK double clutch
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Pump flow declared10.8 gpm · 41.0 L/min13.8 gpm · 52.4 L/min+28% 665
Pressure declared2,901 psi · 200 bar
Three-point lift at ends declared3,913 lb · 1,775 kg5,688 lb · 2,580 kg+45% 665
Rear PTO speeds declared540 rpm540E/540 rpmdiffers
Weight & dimensions
Unladen weight declared4,725 lb · 2,143 kg7,231 lb · 3,280 kg+53% 665
Wheelbase declared80.3 in · 2,040 mm94.1 in · 2,390 mm+17% 665
Length declared138.4 in · 3,515 mm157.5 in · 4,000 mm+14% 665
Width declared73.4 in · 1,865 mm79.9 in · 2,030 mm+9% 665
Height declared96.1 in · 2,440 mm101.2 in · 2,570 mm+5% 665
Ground clearance declared15.0 in · 380 mm18.1 in · 460 mm+21% 665
Turning radius, braked declared15.7 ft · 4.80 m
Fuel tank declared76.0 qt · 71.9 L77.1 qt · 73.0 L

John Deere 5403 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 5403”

VALMET 665 sources

Source
  • Source: Traktorenlexikon, “Valmet 665”