9 material differences · fewer than 12
Tractor oneJohn Deere 5403 (A)2007–2008No measured PTO figureTractor twoMassey Ferguson MF 5410 A2011–2014No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (77%); the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (2007–2008; 2011–2014). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 5403 (A) | MF 5410 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 73.1 hp | 74 hp | — |
| Engine declared | John Deere 3.029 TPY | Perkins 1104 D-44 T | differs |
| Displacement declared | 2.90 L | 4.40 L | +52% MF 5410 A |
| Maximum torque declared | — | 229 lb·ft · 310 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% MF 5410 A |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 10.8 gpm · 41.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,725 lb · 2,143 kg | 8,378 lb · 3,800 kg | +77% MF 5410 A |
| Maximum permissible mass declared | — | 18,739 lb · 8,500 kg | — |
| Wheelbase declared | 80.3 in · 2,040 mm | 97.0 in · 2,464 mm | +21% MF 5410 A |
| Length declared | 138.4 in · 3,515 mm | 166.2 in · 4,221 mm | +20% MF 5410 A |
| Width declared | 73.4–89.6 in · 1,865–2,275 mm | 60.4–80.1 in · 1,533–2,034 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 15.4 in · 390 mm | — |
| Fuel tank declared | 76.0 qt · 71.9 L | 137.4 qt · 130.0 L | +81% MF 5410 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 5403 (A) sources
- Source: Traktorenlexikon, “John Deere 5403”
Massey Ferguson MF 5410 A sources
- Source: Traktorenlexikon, “Massey Ferguson MF 5410”