John Deere 5400 (A) vs VOLVO-BM-VALMET Volvo 505

13 material differences

Tractor one

John Deere 5400 (A)

1992–1997

No measured PTO figure

Tractor two

VOLVO-BM-VALMET Volvo 505

1983–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 5400 (A) and the Volvo 505 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 5400 (A) and VOLVO-BM-VALMET Volvo 505, field by field
Field5400 (A)Volvo 505Gap
Engine
Engine power, claimed claimed59.3 hp64.1 hp+8% Volvo 505
Engine declaredJohn Deere 3.029 TurboVALMET TD 33 DS 5differs
Displacement declared2.94 L3.30 L+12% Volvo 505
Maximum torque declared115 lb·ft · 156 N·m
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h
Clutch declaredPedal-operated dry CARRARO single-disc clutchPedal-actuated, dry LuK single-disc clutchdiffers
Hydraulics & hitch
Pump flow declared11.8 gpm · 44.7 L/min13.9 gpm · 52.7 L/min+18% Volvo 505
Pressure declared3,408 psi · 235 bar2,901 psi · 200 bar+18% 5400 (A)
Three-point lift at ends declared3,803 lb · 1,725 kg8,699 lb · 3,946 kg+129% Volvo 505
Rear PTO speeds declared540 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared4,661 lb · 2,114 kg7,760 lb · 3,520 kg+67% Volvo 505
Wheelbase declared80.7 in · 2,050 mm93.2 in · 2,368 mm+16% Volvo 505
Length declared140.2 in · 3,561 mm172.8 in · 4,390 mm+23% Volvo 505
Width declared72.7 in · 1,846 mm77.2 in · 1,960 mm+6% Volvo 505
Height declared91.1 in · 2,314 mm105.1 in · 2,670 mm+15% Volvo 505
Ground clearance declared18.1 in · 460 mm18.3 in · 465 mm
Turning radius, braked declared9.8 ft · 3.00 m
Fuel tank declared72.0 qt · 68.1 L190.2 qt · 180.0 L+164% Volvo 505

John Deere 5400 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 5400 (USA)”

VOLVO-BM-VALMET Volvo 505 sources

Source
  • Source: Traktorenlexikon, “Volvo 505”
  • Source: Traktorenlexikon, “Valmet 505”