John Deere 5310 (A) or UTB U-643 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 5310 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-643 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The John Deere 5310 (A) suits loader and hydraulic implement work better on this data: 41% (14.1 L/min / 3.7 gpm) more hydraulic flow.
  • The John Deere 5310 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 5310 (A) and UTB U-643 DT, with the call on each
Question5310 (A)U-643 DTCall
Which puts more power through the PTO shaft?47.1 kW (63.2 hp)Traktorenlexikon, “John Deere 5310 (USA)”47.1 kW (63.2 hp)Traktorenlexikon, “UTB U 643 DT”Not comparableNot comparable on power at the PTO shaft: the 5310 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-643 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 5310 (A) and the U-643 DT.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 5310 (A) and the U-643 DT.
Which pumps more oil for implements?48.1 L/min (12.7 gpm)Traktorenlexikon, “John Deere 5310 (USA)”34.0 L/min (9.0 gpm)Traktorenlexikon, “UTB U 643 DT”AheadThe John Deere 5310 (A) has 41% more hydraulic flow (14.1 L/min / 3.7 gpm) than the UTB U-643 DT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,640 kg (3,616 lb)Traktorenlexikon, “John Deere 5310 (USA)”—No figureNo call on three-point lift: no figure on record for the U-643 DT.
Which is heavier, for traction?2,110 kg (4,652 lb)Traktorenlexikon, “John Deere 5310 (USA)”3,125 kg (6,889 lb)Traktorenlexikon, “UTB U 643 DT”Ahead (a fact, not an advantage)The UTB U-643 DT is 48% heavier (1,015 kg / 2,238 lb) than the John Deere 5310 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 5310 (A) and the U-643 DT.
Which has the wider choice of gears?9 to 12Traktorenlexikon, “John Deere 5310 (USA)”12Traktorenlexikon, “UTB U 643 DT”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?—YesTraktorenlexikon, “UTB U 643 DT”No figureNo call on a creeper range: not stated for the 5310 (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “John Deere 5310 (USA)”25 km/h (15.5 mph)Traktorenlexikon, “UTB U 643 DT”AheadThe John Deere 5310 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the UTB U-643 DT (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “John Deere 5310 (USA)”540/1000 rpmTraktorenlexikon, “UTB U 643 DT”AheadThe UTB U-643 DT offers 1000 rpm at the PTO, which the John Deere 5310 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 5310 (USA)”—No figureNo call on PTO independence: not stated for the U-643 DT.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 5310 (USA)”4WDTraktorenlexikon, “UTB U 643 DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20001988–2004Ahead (a fact, not an advantage)The John Deere 5310 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 5310 (A) has 41% more hydraulic flow (14.1 L/min / 3.7 gpm) than the UTB U-643 DT (both pump flow, as stated by the source).
  • The UTB U-643 DT is 48% heavier (1,015 kg / 2,238 lb) than the John Deere 5310 (A) (both unladen weight, as stated by the source).
  • The John Deere 5310 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the UTB U-643 DT (both top speed forward, as stated by the source).
  • The UTB U-643 DT offers 1000 rpm at the PTO, which the John Deere 5310 (A) does not (as stated by the sources).
  • The John Deere 5310 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 5310 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-643 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources