13 material differences

Tractor oneJohn Deere 5210 (A)1997–2000No measured PTO figureTractor twoVALMET 41001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the 5210 (A) and the 4100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 5210 (A) and VALMET 4100, field by field
Field	5210 (A)	4100	Gap
Engine
Engine power, claimed claimed	52 hp	52 hp	—
Engine declared	John Deere 3.029 D	VALMET 320 D	differs
Displacement declared	2.93 L	3.30 L	+12% 4100
Maximum torque declared	131 lb·ft · 177 N·m	144 lb·ft · 195 N·m	+10% 4100
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.7 gpm · 48.1 L/min	10.3 gpm · 39.0 L/min	+23% 5210 (A)
Pressure declared	3,408 psi · 235 bar	2,901 psi · 200 bar	+18% 5210 (A)
Three-point lift, at the coupling points declared	3,616 lb · 1,640 kg	6,294 lb · 2,855 kg	+74% 4100
Rear PTO speeds declared	540 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,269 lb · 2,390 kg	5,864 lb · 2,660 kg	+11% 4100
Wheelbase declared	80.7 in · 2,050 mm	83.1 in · 2,112 mm	—
Length declared	139.4 in · 3,540 mm	149.2 in · 3,790 mm	+7% 4100
Width declared	71.7 in · 1,820 mm	68.0 in · 1,728 mm	+5% 5210 (A)
Height, over the cab declared	97.0 in · 2,464 mm	92.5 in · 2,350 mm	—
Ground clearance declared	19.3 in · 490 mm	16.7 in · 425 mm	+15% 5210 (A)
Turning radius, braked declared	10.4 ft · 3.18 m	12.8 ft · 3.90 m	+23% 4100
Fuel tank declared	71.9 qt · 68.0 L	100.4 qt · 95.0 L	+40% 4100

Source

Source