7 material differences · fewer than 12
Tractor oneJohn Deere 5210 (A)1997–2000No measured PTO figureTractor twoUTB U-533 (DT)1988–2004No measured PTO figure
Which should you choose?
Read our verdict on the 5210 (A) and the U-533 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 5210 (A) | U-533 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 52 hp | 52 hp | — |
| Engine declared | John Deere 3.029 D | UTB D-115.050 | differs |
| Displacement declared | 2.93 L | 2.70 L | +9% 5210 (A) |
| Maximum torque declared | 131 lb·ft · 177 N·m | 125 lb·ft · 170 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry U.T.B. double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 12.7 gpm · 48.1 L/min | 9.0 gpm · 34.0 L/min | +41% 5210 (A) |
| Pressure declared | 3,408 psi · 235 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,269 lb · 2,390 kg | 5,765 lb · 2,615 kg | +9% U-533 (DT) |
| Wheelbase declared | 80.7 in · 2,050 mm | 83.5 in · 2,120 mm | — |
| Length declared | 139.4 in · 3,540 mm | 143.3 in · 3,640 mm | — |
| Width declared | 71.7 in · 1,820 mm | 68.1 in · 1,730 mm | — |
| Height, over the cab declared | 97.0 in · 2,464 mm | 96.5 in · 2,450 mm | — |
| Ground clearance declared | 19.3 in · 490 mm | 13.8 in · 350 mm | +40% 5210 (A) |
| Turning radius, braked declared | 10.4 ft · 3.18 m | — | — |
| Fuel tank declared | 71.9 qt · 68.0 L | 65.5 qt · 62.0 L | +10% 5210 (A) |
John Deere 5210 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 5210 (USA)”
UTB U-533 (DT) sources
Source
- Source: Traktorenlexikon, “UTB U 533”
- Source: Traktorenlexikon, “UTB U 530”