6 material differences · fewer than 12

Tractor oneJohn Deere 5210 (A)1997–2000No measured PTO figureTractor twoMassey Ferguson MF 355 (A)1988–1994No measured PTO figure

Which should you choose?

Read our verdict on the 5210 (A) and the MF 355 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

John Deere 5210 (A) and Massey Ferguson MF 355 (A), field by field
Field	5210 (A)	MF 355 (A)	Gap
Engine
Engine power, claimed claimed	52 hp	52 hp	—
Engine declared	John Deere 3.029 D	Perkins AT 3.152-4	differs
Displacement declared	2.93 L	2.50 L	+17% 5210 (A)
Maximum torque declared	131 lb·ft · 177 N·m	137 lb·ft · 186 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled single clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.7 gpm · 48.1 L/min	13.9 gpm · 52.5 L/min	+9% MF 355 (A)
Pressure declared	3,408 psi · 235 bar	2,466 psi · 170 bar	+38% 5210 (A)
Rear PTO speeds declared	540 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	5,269 lb · 2,390 kg	5,842 lb · 2,650 kg	+11% MF 355 (A)
Wheelbase declared	80.7 in · 2,050 mm	81.9 in · 2,080 mm	—
Length declared	139.4 in · 3,540 mm	133.9 in · 3,400 mm	—
Width declared	71.7 in · 1,820 mm	70.9 in · 1,800 mm	—
Height, over the cab declared	97.0 in · 2,464 mm	94.9 in · 2,410 mm	—
Ground clearance declared	19.3 in · 490 mm	—	—
Turning radius, braked declared	10.4 ft · 3.18 m	—	—
Fuel tank declared	71.9 qt · 68.0 L	71.9 qt · 68.0 L	—

Source

Source